Can be accelerated with Newer Technology's Eddy Award winning "PowerClip 604‚Ñ¢", part # 7MC604. The PowerClip has over 100 different speed settings which allow the PowerMac 9500 to be set at speeds of up to 175MHz. Typically the 9500/120 and 9500/132 will be set to something between 150MHz and 164MHz. The PowerClip is slotless and therefore leaves all slots open.
Twelve DIMM sockets. Upgraded with one DIMM at a time.
Ships with a minimum of 16MB (two 8MB, or one 16MB DIMM) of RAM installed.
Requires 70ns, or faster, memory.
Can interleave memory for approximately 10-30% faster RAM access. For the fastest speed, sockets A1 & B1, A2 & B2...A6 & B6 should contain identical capacity DIMMs.
This computer comes with 4096K ROMs and an Apple 1.44MB SuperDrive that uses high-density floppy disks and reads, writes, and formats Macintosh, Windows, MS-DOS, OS/2, and ProDOS disks.
Serial Port with the phone icon supports synchronous modems, with handshaking on both output and input supported.
Sound output is 16-bit stereo output.
This computer has an international power supply.
Line voltage: 100 to 240 volts AC, RMS single phase, automatically configured
Frequency: 50 to 60 Hz, single phase
Power: 225 W maximum, not including display
Energy Star compliant
Interfaces
Interfaces:
Six high-performance PCI expansion slots compatible with all PCI 2.0 specification-compliant cards (Note: These slots are not NuBus-compatible), One Apple Desktop Bus (ADB) port for a keyboard, mouse, and other device, 10BaseT and AAUI-15 Ethernet connectors, Two DMA serial (RS-232/RS-422) ports compatible with LocalTalk and GeoPort cables, Dual-channel asynchronous SCSI interface: external channel supports up to six SCSI devices (5MB/sec); internal channel supports a hard disk array (10MB/sec), 16-bit stereo sound input and output ports, DB-15 video port for display on optional accelerated graphics card (9500/120 only)